1/35 Camouflage Pole Support Kit
$12.00
Description: 1/35 Camouflage Pole Support Kit.
Australian Defence Force Camouflage Pole Support Kit
The Australian Defence Force Camouflage Pole Support Kit has been in service across the ADF since the 1970’s. It is used to support camouflage nets, helping to conceal and break up the outline of various equipment and vehicles, including tracked and wheeled vehicles, tents, and other assets. The kits are often seen stowed on the tops and sides of vehicles for rapid deployment in the field. Including this kit will enhance the realism and authenticity of your model or diorama.
Kit Contents:
- 16 × Tops (“Mushrooms”)
Not Included:
Poles are not included in the kit. These can be easily produced using plastic rod. Recommended dimensions are provided below. Joiners are not included. Recommend using Tamiya tape to join the poles. Joiners were 5.5mm in length in 1/35
Recommended Material:
Evergreen Item No. 220– .035″ (.8mm) OD White Polystyrene Rod (Product Code: 787026002200)
Pole Dimensions in 1/35:
- Long poles: 43 mm
- Short poles: 28.6 mm
- Pole Width: .96 mm
Colour Guide:
- Tops: Medium Green
- Joiners and poles: Olive Drab Lusterless
Description: 1/35 Camouflage Pole Support Kit.
Australian Defence Force Camouflage Pole Support Kit
The Australian Defence Force Camouflage Pole Support Kit has been in service across the ADF since the 1970’s. It is used to support camouflage nets, helping to conceal and break up the outline of various equipment and vehicles, including tracked and wheeled vehicles, tents, and other assets. The kits are often seen stowed on the tops and sides of vehicles for rapid deployment in the field. Including this kit will enhance the realism and authenticity of your model or diorama.
Kit Contents:
- 16 × Tops (“Mushrooms”)
Not Included:
Poles are not included in the kit. These can be easily produced using plastic rod. Recommended dimensions are provided below. Joiners are not included. Recommend using Tamiya tape to join the poles. Joiners were 5.5mm in length in 1/35
Recommended Material:
Evergreen Item No. 220– .035" (.8mm) OD White Polystyrene Rod (Product Code: 787026002200)
Pole Dimensions in 1/35:
- Long poles: 43 mm
- Short poles: 28.6 mm
- Pole Width: .96 mm
Colour Guide:
- Tops: Medium Green
- Joiners and poles: Olive Drab Lusterless
Additional information
| Weight | .014 kg |
|---|---|
| Dimensions | 1 × 1 × 1 mm |
Reviews
There are no reviews yet.